View NL8060BC31-20_6945686.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: en0551ej4v0ds00 (4th edition) published date: april 2002 n cp(n) nec corporation 2002 all rights reserved. all information is subject to change without notice. tft color lcd module NL8060BC31-20 30.8cm (12.1 type) svga data sheet (4th edition) www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 2 introduction no part of this document shall be copied in any form or by any means without the prior written consent of nec corporation. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product described herein or any other liability arising from use of such application. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or of others. while nec corporation has been making continuous effort to enhance the reliability of its products, the possibility of failures cannot be eliminated entirely. to minimize risks of damage to property or injury to person arising from a failure in an nec product, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec products are classified into the following three quality grades: "standard" , "special" , "specific" the "specific" quality grade applies only to applications developed based on a customer designated "quality assurance program" for a specific application. the recommended applications of a product depend on its quality grade, as indicated below. customers must check the quality grade of each application before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: military systems, aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems (medical equipment, etc.) and any other equipment the quality grade of this product is "standard" unless otherwise specified in this document. if customers intend to use this product for applications other than those specified for "standard" quality grade, they should contact nec corporation sales representative in advance. anti-radioactive design is not implemented in this product. www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 3 contents introduction................................................................................................................... ....................... 2 1. outline ..................................................................................................................... .............................. 5 1.1 structure and principle .................................................................................................... ...... 5 1.2 applications ............................................................................................................... ..................... 5 1.3 features ................................................................................................................... ......................... 5 2. general specifications...................................................................................................... .......... 6 3. block diagram ............................................................................................................... ................... 7 4. detailed specifications..................................................................................................... .......... 9 4.1 mechanical specifications .................................................................................................. ... 9 4.2 absolute maximum ratings................................................................................................... .9 4.3 electrical characteristics ................................................................................................ 1 0 4.3.1 driving for lcd panel signal processing board ......................................................................... 10 4.3.2 working for backlight lamp............................................................................................... .......... 10 4.3.3 power supply voltage ripple .............................................................................................. ...........11 4.3.4 fuse ..................................................................................................................... .........................11 4.4 power supply voltage sequence........................................................................................ 12 4.4.1 sequence for lcd panel signal processing board....................................................................... 12 4.4.2 sequence for backlight inverter (option)................................................................................. ... 12 4.5 connections and functions for interface pins ........................................................ 13 4.5.1 lcd panel signal processing board ........................................................................................ .... 13 4.5.2 backlight lamp ........................................................................................................... ................. 14 4.5.3 positions of a plug and a socket ......................................................................................... ......... 14 4.6 display colors and input data signals.......................................................................... 15 4.7 display positions .......................................................................................................... .............. 16 4.8 scanning directions ........................................................................................................ ........ 16 4.9 input signal timings for lcd panel signal processing board .......................... 17 4.9.1 outline of input signal timings.......................................................................................... .......... 17 4.9.2 detailed input signal timing chart for fixed mode....................................................................... 1 8 4.9.3 detailed input signal timing chart for de mode ......................................................................... 19 4.9.4 timing characteristics ................................................................................................... .............. 20 4.10 optics .................................................................................................................... .......................... 21 4.10.1 optical characteristics ................................................................................................. .............. 21 4.10.2 definition of contrast ratio ............................................................................................ ............ 22 4.10.3 definition of luminance uniformity...................................................................................... ..... 22 4.10.4 definition of response times............................................................................................ .......... 22 4.10.5 definition of viewing angles ............................................................................................ ......... 22 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 4 contents 5. reliability tests ........................................................................................................... ................. 23 6. precautions................................................................................................................. ...................... 24 6.1 meaning of caution signs ................................................................................................... .. 24 6.2 cautions ................................................................................................................... ...................... 24 6.3 attentions................................................................................................................. ..................... 24 6.3.1 handling of the product.................................................................................................. ............. 24 6.3.2 environment.............................................................................................................. .................. 24 6.3.3 characteristics .......................................................................................................... ................... 25 6.3.4 other.................................................................................................................... ........................ 25 7. outline drawings ............................................................................................................ .............. 26 7.1 front view ................................................................................................................. .................... 26 7.2 rear view.................................................................................................................. ...................... 27 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 5 1. outline 1.1 structure and principle NL8060BC31-20 module is composed of the amorphous silicon thin film transistor liquid crystal display (a-si tft lcd) panel structure with driver lsis for driving the tft (thin film transistor) array and a backlight unit. the a-si tft lcd panel structure is injected liquid crystal material into a narrow gap between the tft array glass substrate and a color-filter glass substrate. color (red, green, blue) data signals from a host system (e.g. pc, signal generator, etc.) are modulated into best form for active matrix system by a signal processing board, and sent to the driver lsis which drive the individual tft arrays. the tft array as an electro-optical switch regulates the amount of transmitted light from the backlight assembly, when it is controlled by data signals. color images are created by regulating the amount of transmitted light through the tft array of red, green and blue dots. 1.2 applications ? display terminal for control system 1.3 features ? high luminance ? wide viewing angle ? high contrast ? 6-bit digital rgb signals ? reversible-scan direction ? edge light type ? replaceable lamp for backlight unit (inverter less) ? acquisition product for ul/c-ul (file number: e170632) www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 6 2. general specifications display area 246.0 (w) 184.5 (h) mm (typ.) diagonal size of display 30.8 cm (12.1 inches) drive system a-si tft active matrix display color 262,144 colors pixel 800 (h) 600 (v) pixels pixel arrangement rgb (red dot, green dot, blue dot) vertical stripe dot pitch 0.1025 (w) 0.3075 (h) mm pixel pitch 0.3075 (w) 0.3075 (h) mm module size 280.0 (w) 210.0 (h) 13.0 (d) mm (typ.) weight 760 g (typ.) contrast ratio 400:1 (typ.) viewing angle at the contrast ratio 10:1 ? horizontal: left side 80 (typ.), right side 80 (typ.) ? vertical: up side 80 (typ.), down side 80 (typ.) designed viewing direction ? viewing angle with optimum grayscale ( =2.2): normal axis polarizer surface non matt treatment polarizer pencil-hardness 3h (min.) [by jis k5400] color gamut at lcd panel center 38 % (typ.) [against ntsc color space] response time 40 ms (typ.) luminance at 5.0marms / lamp 250 cd/m 2 (typ.) signal system 6-bit digital signals for data of rgb colors, dot clock (clk), data enable (de), horizontal synchronous signal (hsync), vertical synchronous signal (vsync) power supply voltage lcd panel signal processing board: 3.3v or 5.0v backlight edge light type: 2 cold cathode fluorescent lamps replaceable parts ? lamps for backlight unit: type no. 121lhs16 recommended inverter (option) ? inverter: type no. 121pw111 power consumption at maximum luminance and checkered flag pattern 7.0 w (typ.) www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 7 3. block diagram note1: gnd and gndb (backlight inverter ground) should be connected together in customer equipment. note2: the metallic frame of lamp holder is connected to vblc (lamp low voltage terminal). ? host v-driver 2,400 lines lcd panel h: 800 3 (r,g,b) v: 600 600 lines vcc clk b0 to b5 g0 to g5 r0 to r5 dpsr de vsync hsync gnd 200 ? 200 ? 200 ? 47 ? 200 ? 200 ? 200 ? 30 k ? lcd module (product) lcd panel signal processing board dc/dc converter fuse controller backlight inverter (option) vblh vblh gndb vblc backlight unit (edge light type) n ote1 lamp lamp metallic frame of lamp holder n ote2 n ote1 h-driver power supply for gradation www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 8 note3: connections between gnd, shield plate and vblc in the lcd module front shield plate - rear shield plate a connected front shield plate - rear shield plate b not connected gnd - front shield plate and rear shield plate a not connected gnd - rear shield plate b not connected vblc - front shield plate and rear shield plate a not connected vblc - rear shield plate b connected gnd - vblc not connected panel : e170632 **************** disposal f lourescent lamps . please fo l low loca l ord inances ****** pow er before serv i ce . r isk 0f e lectr ic shock . r h igh vol tage caut ion d i sco n nect t he e lect r i c model : nl8060bc31 -20 ******** ************* ser ia l : c us ************ **.**.** ** ****** the tft color lcd pane l conta ins co ld ca thode ****************** or regu lat ions for its *************** ******** >pc - (gf2 0+qd )< mad e in japan rear shield plate b rear shield plate a front shield plate ? www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 9 4. detailed specifications 4.1 mechanical specifications parameter specification unit module size 280.0 0.5 (w) 210.0 0.5 (h) 13.0 0.7 (d) note1 mm display area 246.0 0.5 (w) 184.5 0.5 (h) note1 mm weight 760 (typ.), 800 (max.) g note1: see " 7. outline drawings ". 4.2 absolute maximum ratings parameter symbol rating unit remarks lcd panel signal board vcc -0.3 to +6.5 v high voltage side (hot) note1 vblh 2,000 vrms power supply voltage lamp low voltage side (cold) note2 vblc 42.4 vrms display signals note3 vd -0.3 to vcc+0.3 v input voltage for signals function signals note4 vf -0.3 to vcc+0.3 v ta = 25 c storage temperature tst -20 to +60 c front surface topf 0 to +55 c operating temperature rear surface topr 0 to +55 c - 95 % ta 40 c 85 % 40 < ta 50 c relative humidity note5 rh 70 % 50 < ta 55 c absolute humidity note5 ah 78 note6 g/m 3 ta > 55 c note1: "vblh" is the voltage value between low voltage terminal (cold) and high voltage terminal (hot). note2: "vblc" is the voltage value between backlight inverter ground (gndb) and low voltage terminal (cold). note3: display signals are clk, hsync, vsync, de and data (r0 to r5, g0 to g5, b0 to b5). note4: function signal is dpsr. note5: no condensation note6: ta = 55c, rh = 70% www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 10 4.3 electrical characteristics 4.3.1 driving for lcd panel signal processing board (ta = 25 c) parameter symbol min. typ. max. unit remarks 3.0 3.3 3.6 v for 3v system power supply voltage vcc 4.7 5.0 5.3 v for 5v system - 400 note1 600 ma vcc = 3.3v power supply current icc - 300 note1 500 ma vcc = 5.0v low vdll 0 - 0.3vcc v logic input voltage for display signals high vdlh 0.7vcc - vcc v low vfdl 0 - 0.3vcc v input voltage for dpsr signal high vfdh 0.7vcc - vcc v cmos level note1: checkered flag pattern [by eiaj ed-2522] 4.3.2 working for backlight lamp parameter symbol ta min. typ. max. unit remarks 0 c 1,200 - - vrms starting voltage vs 25 c 960 - - vrms note1 power supply voltage vblh 25 c - 600 - vrms note1,note2 power supply current ibl 25 c 3.0 5.0 6.0 marms note2, note3 oscillation frequency fo 25 c 58 65 69 khz note4 note1: the power supply voltage cycle between lamps should be kept on a same phase. "vs" and "vblh" are the voltage value between low voltage side (cold) and high voltage side (hot). note2: the asymmetric ratio of working waveform for lamps (power supply voltage peak ratio, power supply current peak ratio and waveform space ratio) should be less than 5 % (see the following figure.). if the waveform is asymmetric, dc (direct current) element apply into the lamp. in this case, a lamp lifetime may be shortened, because a distribution of a lamp enclosure substance inclines toward one side between low voltage terminal (cold terminal) and high voltage terminal (hot terminal). pa: supply voltage/current peak for positive, pb: supply voltage/current peak for negative sa: waveform space for positive part, sb: waveform space for negative part note3: the lamp holder of this product contains two backlight lamps. the low voltage terminal of both lamps is connected to one contact point. also above power supply current specification is one lamp duty. therefore, this lamp holder becomes twice as many power supply current as above value. the measurement for the power supply current value of one lamp should measure to use between low voltage terminal (cold terminal) and high voltage terminal (hot terminal) to each lamp. note4: in case "fo" is not the recommended value, beat noise may display on the screen, because of interference between "fo" and "1/th". recommended value of "fo" is as following. th: horizontal synchronous cycle (see "4.9.4 timing characteristics".) n: natural number (1, 2, 3 ???????? ) fo = 1 4 1 th (2n-1) pa pb sa sb 0 ? pa - pb ? pb 100 5 % ? sa - sb ? sb 100 5 % www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 11 4.3.3 power supply voltage ripple this product works, even if the ripple voltage levels are beyond the permissible values as following the table, but there might be noise on the display image. parameter power supply voltage ripple voltage note1 (measure at input terminal of power supply) unit 3.3 v 100 mvp-p vcc 5.0 v 100 mvp-p note1: the permissible ripple voltage includes spike noise. 4.3.4 fuse fuse fusing line type supplier rating fusing current note1 1.6 a vcc kab2402162na31 matsuo electric co., ltd. 24 v 3.2 a note1: the power supply capacity should be more than the fusing current. if the power supply capacity is less than the fusing current, the fuse may not blow for a short time, and then nasty smell, smoking and so on may occur. www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 12 4.4 power supply voltage sequence 4.4.1 sequence for lcd panel signal processing board note1: in terms of voltage variation (voltage drop) while vcc rising edge is below 3.0v in "vcc = 3.3v" or 4.7v in "vcc = 5.0v", a protection circuit may work, and then this product may not work. note2: display (clk, hsync, vsync, de, r0 to r5, g0 to g5, b0 to b5) and function (dpsr) signals must be low or high-impedance, exclude the valid period (see above sequence diagram), in order to avoid that internal circuits is damaged. if some of display and function signals of this product are cut while this product is working, even if the signal input to it once again, it might not work normally. if customer stops the display and function signals, they should be cut vcc. 4.4.2 sequence for backlight inverter (option) note1: these are display and function signals for lcd panel signal processing board. note2: the backlight inverter voltage (vddb) should be inputted within the valid period of display and function signals, in order to avoid unstable data display. display and function signals note1 vddb valid period n ote2 valid period off 20ms < t < 50ms 0ms < t < 35ms on 3.0v or 4.7v 0v 5ms < tr < 30ms vcc n ote1 display and function signals note2 toff > 50ms www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 13 4.5 connections and functions for interface pins 4.5.1 lcd panel signal processing board cn1 socket (lcd module side): df9-41p-1v (hirose electric co., ltd.) adaptable plug: df9-41s-1v (hirose electric co., ltd.) pin no. symbol signal remarks 1 gnd ground 2clk dot clock 3 gnd ground 4 hsync horizontal synchronous 5 vsync vertical synchronous 6 gnd ground 7 gnd ground 8 gnd ground - 9 r0 red data (lsb) least significant bit 10 r1 red data 11 r2 red data 12 gnd ground 13 r3 red data 14 r4 red data - 15 r5 red data (msb) most significant bit 16 gnd ground 17 gnd ground 18 gnd ground - 19 g0 green data (lsb) least significant bit 20 g1 green data 21 g2 green data 22 gnd ground 23 g3 green data 24 g4 green data - 25 g5 green data (msb) most significant bit 26 gnd ground 27 gnd ground 28 gnd ground - 29 b0 blue data (lsb) least significant bit 30 b1 blue data 31 b2 blue data 32 gnd ground 33 b3 blue data 34 b4 blue data - 35 b5 blue data (msb) most significant data 36 gnd ground - 37 de select of de / fixed mode de mode: data enable signal, fixed mode: open 38 nc non connection 39 vcc power supply 40 vcc power supply - 41 dpsr select of scan direction normal scan: low or open, reverse scan: high note1 note1: see "4.8 scanning directio ns". cn1: figure of socket 246 36 38 40 13 57 35 37 39 41 ? www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 14 4.5.2 backlight lamp cn2 plug: bhr-03vs-1 (j.s.t mfg. co., ltd.) adaptable socket: sm03 (4.0) b-bhs-tb (j.s.t mfg. co., ltd.) pin no. symbol signal remarks 1 vblc low voltage (cold) 2 vblh high voltage (hot) 3 vblh high voltage (hot) - 4.5.3 positions of a plug and a socket cn2: figure of plug 1 3 cn1 1 41 2 40 barcode label n ame plate cn2 caution label low voltage (cold) high voltage (hot) 1 3 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 15 4.6 display colors and input data signals this product can display in equivalent to 262,144 colors in 64 scale. also the relation between display colors and input data signals is as the following table. data signal (0: low level, 1: high level) display colors r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black blue red magenta green cyan yellow white 000000 000000 111111 111111 000000 000000 111111 111111 000000 000000 000000 000000 111111 111111 111111 111111 000000 111111 000000 111111 000000 111111 000000 111111 red scale black dark bright red 000000 000001 000010 : : 111101 111110 111111 000000 000000 000000 : : 000000 000000 000000 000000 000000 000000 : : 000000 000000 000000 green scale black dark bright green 000000 000000 000000 : : 000000 000000 000000 000000 000001 000010 : : 111101 111110 111111 000000 000000 000000 : : 000000 000000 000000 blue scale black dark bright blue 000000 000000 000000 : : 000000 000000 000000 000000 000000 000000 : : 000000 000000 000000 000000 000001 000010 : : 111101 111110 111111 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 16 4.7 display positions the following table is the coordinates per pixel (see figure of "4.8 scanning directions".). c( 0, 0) c( 1, 0) ? ? ? c( x, 0) ? ? ? c(798, 0) c(799, 0) c( 0, 1) c( 1, 1) ? ? ? c( x, 1) ? ? ? c(798, 1) c(799, 1) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? c( 0, y) c( 1, y) ? ? ? c( x, y) ? ? ? c(798, y) c(799, y) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? c( 0,598) c( 1,598) ? ? ? c( x,598) ? ? ? c(798,598) c(799,598) c( 0,599) c( 1,599) ? ? ? c( x,599) ? ? ? c(798,599) c(799,599) 4.8 scanning directions the following figures are seen from a front view. also the arrow shows the direction of scan. note1: meaning of c (x, y) and d (x, y) c (x, y): the coordinates of the display position (see "4.7 display positions".) d (x, y): the data number of input signal for lcd panel signal processing board figure 2. reverse scan (dpsr: high) c (0,0) d (799,599) c (0,599) d (799,0) c (799,599) d (0,0) c (799,0) d (0,599) figure 1. normal scan (dpsr: low or open) c (0,0) d (0,0) c (0,599) d (0,599) c (799,599) d (799,599) c (799,0) d (799,0) n ote1 n ote1 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 17 4.9 input signal timings for lcd panel signal processing board 4.9.1 outline of input signal timings ? horizontal signal note1: fixed mode cannot be used while working of de mode. note2: this diagram indicates virtual signal for set up to timing. note3: customer should be inputted synchronized signals (hsync, vsync) in addition to de signal to this product, when it is worked in de mode. synchronized signals are used for de/fixed mode detection. ? vertical signal note1: fixed mode cannot be used while working of de mode. note2: this diagram indicates virtual signal for set up to timing. note3: customer should be inputted synchronized signals (hsync, vsync) in addition to de signal to this product, when it is worked in de mode. synchronized signals are used for de/fixed mode detection. note4: see "4.9.2 detailed input signal timing chart for fixed mode" and "4.9.3 detailed input signal timing chart for de mode" for numeration of pulse. horizontal back-porch (thb) horizontal front-porch (thf) horizontal synchronizing pulse width (thp) horizontal synchronizing cycle (th) horizontal display period (thd) hsync (fixed mode) note1 display period note2 data enable (de mode) note3 vertical back-porch (tvb) vertical front-porch (tvf) vertical synchronizing pulse width (tvp) vertical synchronizing cycle (tv) vertical display period (tvd) 1 2 34 600 vsync (fixed mode) note1 display period note2 data enable (de mode) note3 n ote4 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 18 4.9.2 detailed input signal timing chart for fixed mode ? outline chart note1: x is data number from 1 to 798. see "4.8 scanning directions". ? detail of a part tvrf tvrf a vdlh vdll vsync vdlh vdll hsync vdlh 0.5vcc vdll clk vdlh vdll data (r0 to r5) (g0 to g5) (b0 to b5) tvhs tvhh tvhs tvhh thrf thrf thh ths ths thh tdrf tdrf tds tdh tcr f tcrf tch tc 1000 1001 1024 1 2 12 13 200 201 d (0, 0) d (799, 0) d (0, 599) d (799, 599) 613 25 625 1 d (x, 0) d (x, 599) note1 614 24 3 th p thp + thb thd thf tv p tvp + tvb tvd tvf 2 tvb thb th tv vdlh 0.5vcc vdll clk tc tch thh ths tds tdh tdrf tdrf thh ths thrf thrf tcrf tcrf vdlh vdll data (r0 to r5) (g0 to g5) (b0 to b5) vdlh vdll hsync 1 2 12 13 200 201 thp + thb thp thb www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 19 4.9.3 detailed input signal timing chart for de mode customer should be inputted synchronized signals (see "4.9.2 detailed input signal timing chart for fixed mode".) in addition to de signal to this product, when it is worked in de mode. synchronized signals are used for de/fixed mode detection. ? outline chart note1: x is data number from 1 to 798. see "4.8 scanning directions". ? detail of a part note1: x is data number from 1 to 798. see "4.8 scanning directions". de vdlh 0.5vcc vdll clk vdlh vdll data (r0 to r5) (g0 to g5) (b0 to b5) tdes tdeh tdrf tdrf tds tdh tcrf tcr f tch tc 800 d (0, 0) d (799, 0) 600 1 d (x, 0) thd tvd a x+1 tdes tder f tderf note1 1 2 d (x, 2) d (0, 2) d (799, 2) 1024 (typ.) tdeh 801 d (x, 599) d (0, 599) d (799, 599) vdlh 0.5vcc vdll tv th note1 vdlh 0.5vcc vdll clk tds tdh tdrf tdrf tc tcrf tderf vdlh vdll data (r0 to r5) (g0 to g5) (b0 to b5) de tch tcrf tdeh tdes tderf tdeh tdes vdlh vdll d (0, 0) d (x, 0) d (799, 0) 1 x+1 800 801 n ote1 n ote1 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 20 4.9.4 timing characteristics ? common to fixed mode and de mode parameter symbol min. typ. max. unit remarks frequency tcf 34.0 38.4 40.0 mhz 26.1 ns (typ.) note1 duty tcd 0.4 - 0.6 - note1 clk rise time, fall time tcrf - - 10 ns setup time tds 8 - - ns clk-data hold time tdh 10 - - ns data rise time, fall time tdrf - - 10 ns - note1: definition of parameters is as follows. tcf = 1/tc, tcd = tch/tc = tch tcd ? fixed mode parameter symbol min. typ. max. unit remarks 20.7 26.7 30.1 s 37.5 khz (typ.) cycle th 1024 clk display period thd 800 clk front-porch thf 24 clk pulse width thp 12 72 - clk back-porch thb - 128 198 clk note1 total of pulse width and back-porch thp + thb 200 clk note1, note2 setup time ths 8 - - ns clk- hsync hold time thh 10 - - ns hsync rise time, fall time thrf - - 10 ns - 16.0 16.7 18.8 ms 59.9 hz (typ.) cycle tv 625 h display period tvd 600 h front-porch tvf 1 h pulse width tvp 1 - 2 h back-porch tvb 22 - 23 h note1 total of pulse width and back-porch tvp + tvb 24 h note1, note2 setup time tvhs 15 - - ns note1 vsync-hsync hold time tvhh 1 - - clk vsync rise time, fall time tvrf - - 10 ns - note1: definition of parameters is as follows. tc = 1clk, th = 1h note2: keep tvp + tvb and thp + thb within the table. if it is out of specification, display position will be shifted to right/left side or up/down. ? de mode parameter symbol min. typ. max. unit remarks cycle th 829 1024 - clk horizontal display period thd 800 clk cycle tv 603 625 - h vertical (one frame) display period tvd 600 h note2 setup time tdes 4 - - ns clk-de hold time tdeh 5 - - ns de note1 rise time, fall time tderf - - 10 ns - note1: customer should be inputted synchronized signals (see fixed mode in "4.9.4 timing characteristics".) in addition to de signal to this product, when it is worked in de mode. synchronized signals are used for de/fixed mode detection. note2: definition of parameters is as follows. tc = 1clk, th = 1h www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 21 4.10 optics 4.10.1 optical characteristics parameter note1 condition symbol min. typ. max. unit remarks contrast ratio white/black at center r = 0 , l = 0 , u = 0 , d = 0 cr 300 400 - - note2 luminance white at center r = 0 , l = 0 , u = 0 , d = 0 l 200 250 - cd/m 2 - luminance uniformity - lu - 1.25 1.40 - note3 x coordinate wx - 0.308 - - white y coordinate wy - 0.351 - - x coordinate rx - 0.576 -- red y coordinate ry - 0.349 -- x coordinate gx - 0.329 -- green y coordinate gy - 0.539 -- x coordinate bx - 0.162 -- chromaticity blue y coordinate by - 0.172 -- color gamut r = 0 , l = 0 , u = 0 , d = 0 at center, against ntsc color space c - 38 - % note4 black to white ton - 40 50 ms response time white to black toff - 40 50 ms note5 note6 right u = 0 , d = 0 , cr = 10 r -80 - left u = 0 , d = 0 , cr = 10 l -80 - up r = 0 , l = 0 , cr = 10 u -80 - viewing angle down r = 0 , l = 0 , cr = 10 d -80 - note7 note1: measurement conditions are as follows. ta = 25 c, vcc = 3.3v, ibl = 5.0marms/lamp optical characteristics are measured at luminance saturation after 20minutes from working the product, in the dark room. also measurement method for luminance is as follows. note2: see "4.10.2 definition of contrast ratio". note3: see "4.10.3 definition of luminance uniformity". note4: these coordinates are found on cie 1931 chromaticity diagram. note5: product surface temperature: topf = 25 c note6: see "4.10.4 definition of response times". note7: see "4.10.5 definition of viewing angles". 1 photodetector (topcon bm-5a) lcd module (product) 50cm www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 22 4.10.2 definition of contrast ratio the contrast ratio is calculated by using the following formula. luminance of white screen luminance of black screen 4.10.3 definition of luminance uniformity the luminance uniformity is calculated by using following formula. maximum luminance from to minimum luminance from to the luminance is measured at near the 5 points shown below. 4.10.4 definition of response times response time is measured, the luminance changes from "black" to "white", or "white" to "black" on the same screen point, by photo-detector. ton is the time it takes the luminance change from 10% up to 90%. also toff is the time it takes the luminance change from 90% down to 10% (see the following diagram.). 4.10.5 definition of viewing angles contrast ratio (cr) = luminance uniformity (lu) = left upper lower n ormal axis (perpendicular) u d r l 12 o?clock right 133 400 667 100 300 500 100% 90% 10 % 0% ton toff luminance white black www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 23 5. reliability tests test item condition judgement high temperature and humidity (operation) 60 2 c, rh = 60%, 240hours display data is white. heat cycle (operation) 0 3 c 1hour 55 3 c 1hour 50cycles, 4hours/cycle display data is white. thermal shock (non operation) -20 3 c 30minutes 60 3 c 30minutes 100cycles, 1hour/cycle temperature transition time is within 5 minutes. esd (operation) 150pf, 150 ? , 10kv 9 places on a panel surface note2 10 times each places at 1 sec interval dust (operation) sample dust: no. 15 (by jis-z8901) 15 seconds stir 8 times repeat at 1 hour interval no display malfunctions note1 vibration (non operation) 5 to 100hz, 19.6m/s 2 1 minute/cycle x, y, z direction 10 times each directions mechanical shock (non operation) 539m/ s 2 , 11ms x, y, z direction 3 times each directions no display malfunctions note1 no physical damages note1: display functions are checked under the same conditions as product inspection. note2: see the following figure for discharge points. www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 24 6. precautions 6.1 meaning of caution signs the following caution signs have very important meaning. be sure to read "6.2 cautions", after understanding this contents! this sign has the meaning that customer will be injured by himself, if customer has wrong operations. 6.2 cautions ? ? ? ? pay attention to burn injury for the working backlight! it may be over 35 c from ambient temperature. ? ? ? ? do not shock and press the lcd panel and the backlight! danger of breaking, because they are made of glass. (shock: to be not greater 539m/s 2 and to be not greater 11ms, pressure: to be not greater 19.6n) 6.3 attentions 6.3.1 handling of the product take hold of both ends without touch the circuit board when customer pulls out products (lcd modules) from inner packing box. if customer touches it, products may be broken down or out of adjustment, because of stress to mounting parts. do not hook cables nor pull connection cables such as flexible cable and so on, for fear of damage. if customer puts down the product temporarily, the product puts on flat subsoil as a display side turns down. take the measures of electrostatic discharge such as earth band, ionic shower and so on, when customer deals with the product, because products may be damaged by electrostatic. the torque for mounting screws must never exceed 0.29n ? m. higher torque values might result in distortion of the bezel. do not press or rub on the sensitive display surface. if customer clean on the panel surface, nec corporation recommends using the cloth with ethanolic liquid such as screen cleaner for lcd. do not push-pull the interface connectors while the product is working, because wrong power sequence may break down the product. 6.3.2 environment do not operate or store in high temperature, high humidity, dewdrop atmosphere or corrosive gases. keep the product in antistatic pouch in room temperature, because of avoidance for dusts and sunlight, if customer stores the product. do not operate in high magnetic field. circuit boards may be broken down by it. use an original protection sheet on the product surface (polarizer). adhesive type protection sheet should be avoided, because it may change color or properties of the polarizer. www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 25 6.3.3 characteristics the following items are neither defects nor failures. response time, luminance and color may be changed by ambient temperature. the lcd may be seemed luminance non-uniformity, flicker, vertical seam or small spot by display patterns. optical characteristics (e.g. luminance, display uniformity, etc.) gradually is going to change depending on operating time, and especially low temperature, because the lcd has cold cathode fluorescent lamps. do not display the fixed pattern for a long time because it may cause image sticking. use a screen saver, if the fixed pattern is displayed on the screen. the display color may be changed by viewing angle because of the use of condenser sheet in the backlight unit. optical characteristics may be changed by input signal timings. the interference noise of input signal frequency for this product's signal processing board and luminance control frequency of customer's backlight inverter may appear on a display. set up luminance control frequency of backlight inverter so that the interference noise does not appear. 6.3.4 other all gnd, backlight inverter ground (gndb), vcc and backlight inverter power supply voltage (vddb) terminals should be used without a non-connected line. do not disassemble a product or adjust volume without permission of nec corporation. see "replacement manual for lampholder", if customer would like to replace backlight lamps. pay attention not to insert waste materials inside of products, if customer uses screwnails. www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 26 7. outline drawings 7.1 front view unit: mm [249 .0 +0 .3 -0 .3 187 .5 +0 .3 -0 .3 [246 .0 +0 .5 -0 .5 - 2.5 +0 .3 -0 .3 2.5 +0 .3 -0 .3 272 .2 +0 .5 -0 .5 280 .0 +0 .5 -0 .5 210 .0 +0 .5 -0 .5 2.5 +0 .3 -0 .3 2.5 +0 .5 -0 .5 4- 3.5 184 .5 +0 .5 -0 .5 - 181 .3 +0 .3 -0 .3 beze l open ing ac t ive area modu l e c en t er act ive area cen ter 13 .0 +0 .7 -0 .7 13 .0 +0 .7 -0 .7 13 .0 +0 .7 -0 .7 13 .0 +0 .7 -0 .7 (w ) (h ) ] (w ) (h ) ] 7.7 +0 .5 -0 .5 105 .0 +0 .5 -0 .5 9.0 +0 .5 -0 .5 4.5 +0 .5 -0 .5 3.3 +0 .5 -0 .5 4.5 +0 .5 -0 .5 140 .0 +0 .5 -0 .5 18 .7 +0 .5 -0 .5 3.9 +0 .5 -0 .5 1.5 +0 .5 -0 .5 11 .7 +0 .5 -0 .5 7.7 +0 .5 -0 .5 9.0 +0 .5 -0 .5 4.5 +0 .5 -0 .5 3.5 +0 .5 -0 .5 4.5 +0 .5 -0 .5 0.1 +0 .5 -0 .5 4.4 +0 .5 -0 .5 3.1 +0 .5 -0 .5 1.6 +0 .5 -0 .5 4.5 +0 .5 -0 .5 3.3 +0 .5 -0 .5 80 .0 +0 .5 -0 .5 4.5 +0 .5 -0 .5 9.0 +0 .5 -0 .5 1.5 +0 .5 -0 .5 3.9 +0 .5 -0 .5 11 .5 +0 .5 -0 .5 13 .0 +0 .5 -0 .5 4.5 +0 .5 -0 .5 9.0 +0 .5 -0 .5 4.5 +0 .5 -0 .5 3.5 +0 .5 -0 .5 7.1 +0 .5 -0 .5 6.9 +0 .5 -0 .5 7.7 +0 .5 -0 .5 7.7 +0 .5 -0 .5 www.datasheet.co.kr datasheet pdf - http://www..net/
NL8060BC31-20 data sheet en0551ej4v0ds00 27 7.2 rear view unit: mm pane l : e170632 **************** disposal f lourescent lamps . p lease fol low loca l ord inances ****** power be fore serv ice . r isk 0 f e lectr ic shock . r high voltage caut ion disconnect the electric cn 2 model : nl8060bc31 -20 ******** ************* ser ial : c us ************ **.**.** cn 1 ** ****** the tft co lor lcd panel conta ins cold cathode ****************** or regu lat ions for its *************** ******** >pc - (gf2 0+qd )< made in japan 156 .4 +0 .5 -0 .5 2.2 +0 .5 -0 .5 5.0 +0 .5 -0 .5 10 .0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 10 .0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 6.2 +0 .5 -0 .5 5.0 +0 .5 -0 .5 10 .0 +0 .5 -0 .5 10 .0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 5.0 +0 .5 -0 .5 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of NL8060BC31-20

	To Download NL8060BC31-20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .